Download Comsol 5.3 4,2/5 7626 reviews
COMSOL

Link Download: multiphysics 5.3 download full with crack – win linux. Download COMSOL Multiphysics 5.4.0 (5.4.0.225) Win-Linux x64 full Link download COMSOL Multiphysics 5.4.0 x64 full cracked forever. Working with COMSOL Multiphysics 5.4.0 full license. Description: Program for finite element calculations of complex scientific and technical problems. The COMSOL Multiphysics package allows you to simulate almost.

® software version 5.3a update 4 contains performance and stability improvements to COMSOL Multiphysics®, COMSOL Server™, and COMSOL Client. The update applies to COMSOL® software version 5.3a (Build: 180) and version 5.3a update 1 (Build: 201), version 5.3a update 2 (Build: 229), and version 5.3a update 3 (Build: 275). The update can be applied directly to an installation of version 5.3a.

If you have a version older than version 5.3a and a valid license that is on subscription, then perform a full installation of version 5.3a from the Product Download page, which will include all updates.

How to Apply the Software Update

Before proceeding with your installation, make sure that you close and exit any running COMSOL® processes or any software you have running that correlates to a LiveLink™ product you would like to update (Excel®, MATLAB®, or a CAD software).

Updating COMSOL Multiphysics®

The easiest way to install the update for COMSOL Multiphysics® is to start the program and then select Check for Product Updates. If using the Windows® operating system, this is located in the File menu under Help. If using the Linux® operating system or macOS, this is located in the Help menu.

For more information on how to install the update and for offline installation, see the Additional Instructions tab below.

In order to check that the update installation was successful, first start the COMSOL Multiphysics® software and select the About COMSOL Multiphysics menu option. If using the Windows® operating system, this is located in the File menu under Help. If using the Linux® operating system or macOS, this is located in the Help menu. The listed version should be COMSOL Multiphysics® 5.3a (Build: 348).

Updating COMSOL Server™

To update COMSOL Server™ if using the Windows® operating system, run the Update program from the COMSOL Launchers folder in the Start menu.

Note that the COMSOL Server™ service process needs to be stopped before applying the update. For more information on how to install the update, installing on other operating systems, and offline installation, see the Additional Instructions tab below.

To check that the installation was successful, first make sure that COMSOL Server™ is running, then navigate to COMSOL Server™ in a web browser and follow the About COMSOL Server™ link in the lower-right corner. The new version should be COMSOL Server™ 5.3a (Build: 348).

Updating COMSOL Client for Use with COMSOL Server™

To update COMSOL Client for the Windows® operating system, download the new version from Client Download and install. The previous 5.3a installation will be overwritten. Your installation of COMSOL Client must have the same version number as the COMSOL Server™ installation that you connect to.

The following instructions apply only if you are not using the method based on the Check for Product Updates Iso 9001 pdf free download. menu item, as described above.

Updating COMSOL Multiphysics®

1

Check the Version Number

  1. Start COMSOL Multiphysics®.
  2. Open the About COMSOL Multiphysics dialog box. If using the Windows® operating system, the dialog box can be found in the File menu under Help. If using either the Linux® operating system or macOS, the dialog box can be found under the Help menu.
  3. Check that the version number is 5.3a (Build: 180, 201, 229, or 275). This corresponds to the version that has not yet been updated.
2

Install the Update

Before you proceed with the installation, make sure to exit any running COMSOL Multiphysics® processes or any software you have running that correlates to a LiveLink™ product you would like to update (Excel®, MATLAB®, or a CAD software).

  1. Start the COMSOL® software update installer:
    • Windows® operating systems: Run the Update program from the COMSOL Launchers folder in the Start menu, or directly from the COMSOL 5.3a installation folder. The COMSOL Launchers folder can be found in the installation folder, for example, C:Program FilesCOMSOLCOMSOL53aMultiphysicsCOMSOL Launchers.
    • Linux® operating systems: Run the update script from the COMSOL 5.3a installation directory, for example, /usr/local/comsol53a/multiphysics.
    • macOS: Run the COMSOL Update application from the COMSOL 5.3a installation directory, for example, /Applications/COMSOL53a/Multiphysics.
  2. The next step will be taken in the installer program's Options page and depends on whether or not you have a live internet connection or if you plan to download the update file for offline installation:
    • If you have an internet connection: Keep the Direct download setting.
    • If you have an internet connection via a proxy server: Select Download via proxy server and enter your proxy configuration settings.
    • If you do not have an internet connection on the target computer or if you want to apply the update several times on multiple computers: Download the following file to a folder on your computer DOWNLOAD UPDATE (445 MB) In the installer program, select Manual download and click Browse. Navigate to the downloaded file and click Open.
  3. Click Next to get to the Release Notes page for reviewing the update details.
  4. Click Next to get to the Install page and review the software components affected by the update.
  5. In the Install page, click Install to start the installation of the update.
3

Check the Installation

  1. Start COMSOL Multiphysics®.
  2. Open the About COMSOL Multiphysics dialog box. If using the Windows® operating system, this is located in the File menu under Help. If using the Linux® operating system or macOS, this is located in the Help menu.
  3. Check that the version number is 5.3a (Build: 348). (If not, the installation did not succeed.)

Updating COMSOL Server™

1

Check the Version Number

  1. Navigate to the running version of COMSOL Server™ in a web browser.
  2. Click the About COMSOL Server link in the lower-right corner.
  3. Check that the version number is 5.3a (Build: 180, 201, 229, or 275). This corresponds to the version that has not yet been updated.
2

Stop the COMSOL Server™ Processes

Before you proceed with the installation, make sure to stop any running COMSOL Server™ processes.

  1. In Windows®: Stop the server by either typing close, if COMSOL Server™ is running in a command window, or by running the Stop COMSOL Server shortcut from the COMSOL Launchers folder in the start menu, if COMSOL Server™ is installed as a Windows® service.
  2. In Linux®: If you configured COMSOL Server™ using the systemd service, stop it by typing systemctl stop comsolserver53a; otherwise, kill the COMSOL Server™ process.
  3. In macOS: Kill the COMSOL Server™ process.
3

Install the Update

Before you proceed with the installation, make sure to stop any running COMSOL Server™ processes, as described above.

  1. Start the COMSOL® software update installer:
    • Windows® operating systems: Run the Update program from the COMSOL Launchers folder in the Start menu, or directly from the COMSOL 5.3a installation folder. The COMSOL Launchers folder can be found in the installation folder, for example, C:Program FilesCOMSOLCOMSOL53aServerCOMSOL Launchers.
    • Linux® operating systems: Run the update script from the COMSOL 5.3a installation directory, for example, /usr/local/comsol53a/server.
    • macOS: Run the COMSOL Update application from the COMSOL 5.3a installation directory, for example, /Applications/COMSOL53a/Server.
  2. The next step will be taken in the installer program's Options page and depends on whether or not you have a live internet connection or if you plan to download the update file for offline installation:
    • If you have an internet connection: Keep the Direct download setting.
    • If you have an internet connection via a proxy server: Select Download via proxy server and enter your proxy configuration settings.
    • If you do not have an internet connection on the target computer or if you want to apply the update several times on multiple computers: Download the following file to a folder on your computer DOWNLOAD UPDATE (445 MB) In the installer program, select Manual download and click Browse. Navigate to the downloaded file and click Open.
  3. Click Next to get to the Release Notes page for reviewing the update details.
  4. Click Next to get to the Install page and review the software components affected by the update.
  5. In the Install page, click Install to start the installation of the update.
4

Start COMSOL Server™ Again

  • In Windows®: Start COMSOL Server™ by using the COMSOL Server shortcut in the start menu. Alternatively, if COMSOL Server™ was installed as a Windows® service, start it by using the Start COMSOL Server shortcut.
  • In Linux®: If you configured COMSOL Server™ using the systemd service, start it by typing systemctl start comsolserver53a; otherwise, type <installation directory>/bin/comsol server to start COMSOL Server™.
  • In macOS: Type <installation directory>/bin/comsol server to start COMSOL Server™.
5

Check the Installation

  1. Navigate to the running version of COMSOL Server™ in a web browser.
  2. Click the About COMSOL Server link in the lower-right corner
  3. Check that the version number is 5.3a (Build: 348). (If not, the installation did not succeed.)

If you do not have access to the graphical user interface of your operating system or if you want to automate the update process, you can follow the steps below.

Automated Update of COMSOL Multiphysics®

1

Check the Version Number

  1. Start COMSOL Multiphysics®.
  2. Open the About COMSOL Multiphysics dialog box. If using the Windows® operating system, the dialog box can be found in the File menu under Help. If using either the Linux® operating system or macOS, the dialog box can be found under the Help menu.
  3. Check that the version number is 5.3a (Build: 180, 201, 229, or 275). This corresponds to the version that has not yet been updated.
2

Download the Update File

Click the button below to download the update. In some browsers, such as the Internet Explorer® browser, a dialog box will then open where you can click Save directly after the download has occurred.

DOWNLOAD UPDATE (445 MB)3

Installation

Before you proceed with the installation, make sure you have closed any COMSOL sessions or stopped any running COMSOL processes or any software you have running that correlates to a LiveLink™ product you would like to update (Excel®, MATLAB®, or a CAD software).

Windows® Operating Systems

  1. Create a file named setupconfig.ini in your home directory, or anywhere else you have write permission.

  2. Copy the following lines to setupconfig.ini
    installdir = C:Program FilesCOMSOLCOMSOL53aMultiphysics
    installmode = update
    update.filepath = C:UsersusernameDownloadscomsol_5.3.1.348_update.dat

  3. Change installdir path to the target COMSOL installation.Change update.filepath to the path where the manual update file is located.

  4. Run cmd. Start the setup program (located in the COMSOL install directory under ./bin/arch ) with the flag -s and the path to your setupconfig.ini file. Example:C:Program FilesCOMSOLCOMSOL53aMultiphysicsbinwin64setup.exe -s C:Usersusernamesetupconfig.ini

Linux® Operating Systems

  1. Create a file named setupconfig.ini in your home directory, or anywhere else you have write permission.

  2. Copy the following lines to setupconfig.ini
    installdir = /usr/local/comsol53a/multiphysics
    installmode = update
    update.filepath = /home/username/Downloads/comsol_5.3.1.348_update.dat

  3. Change installdir path to the target COMSOL installation.Change update.filepath to the path where the manual update file is located.

  4. Start the setup script (located in the COMSOL install directory under ./bin/arch ) with the flag -s and the path to your setupconfig.ini file. Example:/usr/local/comsol53a/multiphysics/bin/glnxa64/setup -s /home/username/setupconfig.ini

macOS

  1. Create a file named setupconfig.ini in your home directory, or anywhere else you have write permission.

  2. Copy the following lines to setupconfig.ini
    installdir = /Applications/COMSOL53a/Multiphysics
    installmode = update
    update.filepath = /home/username/Downloads/comsol_5.3.1.348_update.dat

  3. Change installdir path to the target COMSOL installation.Change update.filepath to the path where the manual update file is located.

  4. Start the setup script (located in the COMSOL install directory under ./bin/arch ) with the flag -s and the path to your setupconfig.ini file. Example:/Applications/COMSOL53a/Multiphysics/bin/maci64/setup -s /home/username/setupconfig.ini

4

Check the Installation

  1. Start COMSOL Multiphysics®.
  2. Open the About COMSOL Multiphysics dialog box. If using the Windows® operating system, this is located in the File menu under Help. If using the Linux® operating system or macOS, this is located in the Help menu.
  3. Check that the version number is 5.3a (Build: 348). (If not, the installation did not succeed.)

Automated Update of COMSOL Server™

1

Check the Version Number

  1. Navigate to the running version of COMSOL Server™ in a web browser.
  2. Click the About COMSOL Server link in the lower-right corner.
  3. Check that the version number is 5.3a (Build: 180, 201, 229, or 275). This corresponds to the version that has not yet been updated.
2

Stop the COMSOL Server™ Processes

Before you proceed with the installation, make sure to stop any running COMSOL Server™ processes.

  1. In Windows®: Stop the server by either typing close, if COMSOL Server™ is running in a command window, or by running the Stop COMSOL Server shortcut from the COMSOL Launchers folder in the start menu, if COMSOL Server™ is installed as a Windows® service.
  2. In Linux®: If you configured COMSOL Server™ using the systemd service, stop it by typing systemctl stop comsolserver53a; otherwise, kill the COMSOL Server™ process.
  3. In macOS: Kill the COMSOL Server™ process.
3

Download the Update File

Click the button below to download the update. In some browsers, such as the Internet Explorer® browser, a dialog box will then open where you can click Save directly after the download has occurred.

DOWNLOAD UPDATE (445 MB)4

Installation

Before you proceed with the installation, make sure you have closed any COMSOL sessions or stopped any running COMSOL processes or any software you have running that correlates to a LiveLink™ product you would like to update (Excel®, MATLAB®, or a CAD software).

Windows® Operating Systems

  1. Create a file named setupconfig.ini in your home directory, or anywhere else you have write permission.

  2. Copy the following lines to setupconfig.ini
    installdir = C:Program FilesCOMSOLCOMSOL53aServer
    installmode = update
    update.filepath = C:UsersusernameDownloadscomsol_5.3.1.348_update.dat

  3. Change installdir path to the target COMSOL installation.Change update.filepath to the path where the manual update file is located.

  4. Run cmd. Start the setup program (located in the COMSOL install directory under ./bin/arch ) with the flag -s and the path to your setupconfig.ini file. Example:C:Program FilesCOMSOLCOMSOL53aServerbinwin64setup.exe -s C:Usersusernamesetupconfig.ini

Linux® Operating Systems

  1. Create a file named setupconfig.ini in your home directory, or anywhere else you have write permission.

  2. Copy the following lines to setupconfig.ini
    installdir = /usr/local/comsol53a/server
    installmode = update
    update.filepath = /home/username/Downloads/comsol_5.3.1.348_update.dat

  3. Change installdir path to the target COMSOL installation.Change update.filepath to the path where the manual update file is located.

  4. Start the setup script (located in the COMSOL install directory under ./bin/arch ) with the flag -s and the path to your setupconfig.ini file. Example:/usr/local/comsol53a/server/bin/glnxa64/setup -s /home/username/setupconfig.ini

macOS

  1. Create a file named setupconfig.ini in your home directory, or anywhere else you have write permission.

  2. Copy the following lines to setupconfig.ini
    installdir = /Applications/COMSOL53a/Server
    installmode = update
    update.filepath = /home/username/Downloads/comsol_5.3.1.348_update.dat

  3. Change installdir path to the target COMSOL installation.Change update.filepath to the path where the manual update file is located.

  4. Start the setup script (located in the COMSOL install directory under ./bin/arch ) with the flag -s and the path to your setupconfig.ini file. Example:/Applications/COMSOL53a/Server/bin/maci64/setup -s /home/username/setupconfig.ini

5

Start COMSOL Server™ Again

  • In Windows®: Start COMSOL Server™ by using the COMSOL Server shortcut in the start menu. Alternatively, if COMSOL Server™ was installed as a Windows® service, start it by using the Start COMSOL Server shortcut.
  • In Linux®: If you configured COMSOL Server™ using the systemd service, start it by typing systemctl start comsolserver53a; otherwise, type <installation directory>/bin/comsol server to start COMSOL Server™.
  • In macOS: Type <installation directory>/bin/comsol server to start COMSOL Server™.
6

Check the Installation

  1. Navigate to the running version of COMSOL Server™ in a web browser.
  2. Click the About COMSOL Server link in the lower-right corner
  3. Check that the version number is 5.3a (Build: 348). (If not, the installation did not succeed.)

Autodesk, the Autodesk logo, and Revit are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. Linux is a registered trademark of Linus Torvalds in the U.S. and other countries. macOS is a trademark of Apple Inc., registered in the U.S. and other countries. Microsoft, Internet Explorer, Excel, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. MATLAB is a registered trademark of The MathWorks, Inc.

All COMSOL® software products undergo stability improvements that are introduced as updates. The following list contains the most important improvements in COMSOL® version 5.3a update 4 (including those of update 1, 2, and 3).

COMSOL Multiphysics®

  • Corrected an issue where running Client-Server with a Floating Network License (FNL) would consume too many licenses or give an error message1.
  • Fixed a license problem affecting COMSOL Multiphysics for some cluster configurations1.
  • Improved the default plots for the PDE, Boundary Elements interface1.
  • Fixed a problem with highlighting of search results in the Documentation window2.
  • Corrected an issue that made it impossible to copy and paste text from the Help window in the COMSOL Desktop® environment2.
  • Added the Moving Mesh node, available as a subnode to Component >Definitions, to the model tree when selecting Modify model configuration for a study step. The available options are: Solve for and Disable in solvers2.
  • Improved handling of the Prescribed Normal Mesh Velocity boundary conditions on deforming domains. The change makes domain volume changes consistent with the prescribed normal velocity2.
  • Increased robustness for Deforming Domain features. The default mesh smoothing method has changed from Laplace to Yeoh. The Yeoh method is more robust at a small additional computational cost2.
  • Moving Mesh nodes, added under Definitions >Moving Mesh, now include an Override section that contains information about how such nodes override each other. It is also possible to move such nodes and to copy and paste them2.
  • Added the capability for PDE-based Mathematics interfaces to be active on domains that are part of an Absorbing Layer feature2.
  • Corrected a problem with Geometry selections so that those that are dependent on a parameter maintain the same dependence when used under Results2.
  • Fixed a problem with using Function Switch nodes that accessed file resources2.
  • Corrected user-defined model inputs so that they now show all components instead of only the in-plane components2.
  • Fixed a problem with search parameters in the Application Libraries window2.
  • Japanese-language versions of the Software License Agreement and the Introduction to COMSOL Multiphysics PDF documents are now made available when installing the software in Japanese2.
  • Improved search functionality in the Application Library window. You can now search using strings such as @dataset, @numerical, @export, and @report in order to search explicitly for models and applications that contain a specific type of data set, for example2.
  • Improved accuracy of ray interactions with moving boundaries when the geometry shape order is greater than 13.
  • Improved the performance of postprocessing integration where the integrated expressions contain the with or withsol operators3.
  • Fixed an issue with unintended reset of the preference settings when switching to software rendering3.
  • Fixed an issue with the Snap to Grid feature so that it now works as expected when drawing and moving 2D geometry objects3.
  • Corrected an issue with a stress tensor component that occurred when using the External Stress-Strain Relation feature in the Solid Mechanics interface together with an External Material feature of the type General Stress-Deformation. The issue was that the stress tensor component solid.S13 could appear as an undefined variable. This update makes it possible to reference both of the stress tensor component variables solid.S13 and solid.S313.
  • Improved performance in some cases for physics-controlled boundary layer meshing3.
  • Resolved a problem that would prevent changes to tables to be stored when exiting the table field with the Tab key or by clicking the mouse4.
  • Reduced the memory footprint for automatic remeshing4.
  • Resolved a problem that would sometimes cause the COMSOL software to output messages such as 'The solution number is invalid' or 'Solution number is out of range' during distributed parameter sweeps4.
  • On the Linux® operating system, documentation falls back to using a web browser when the required system libraries are not available in the Linux® distribution4.
  • Made stability improvements4.

COMSOL Server™

  • Improved the alignment of custom thumbnails in the COMSOL Server Application Library page2.
  • Fixed an issue when uploading apps larger than 4 GB3.
  • COMSOL Server no longer checks out multiple COMSOLUSERCSL license features for cluster computations4.

Acoustics Module

  • Corrected an issue with the Wall condition so that Rayleigh roughness can be used in combination with a user-defined absorption coefficient2.
  • Fixed a problem with the definition of the fluid bulk modulus postprocessing variable in the Poroelastic Waves interface2.

CAD Import Module

  • Fixed a problem where the automatic check-in of the CADREADER license file feature was delayed in some environments. The CADREADER license file feature enables the ability to import CAD data files in the CAD-interfacing products2.

CFD Module

  • Corrected a problem with the shape function order for certain Bubbly Flow variables when used in combination with P2+P2 and P3+P3 elements2.
  • Corrected a few problems that could occur when using phase-specific turbulence models and the Euler-Euler interface2.
  • Fixed a problem with the Interior Fan condition for the Reacting Flow multiphysics coupling2.
  • Fixed a problem with the Interior Fan and Screen conditions for turbulent nonisothermal flow models2.
  • Added support for the Stokes flow property in the Electrodeposition Module3.
  • Improved the Wetted wall multiphysics coupling so that it uses the correct shape function order by default4.

Chemical Reaction Engineering Module

  • Corrected definitions of (partial molar) species properties used in the Chemistry and Reaction Engineering interfaces when coupled to the Thermodynamics interface. Updated evaluation and display of results for the Membrane Dialysis example app1.
  • Corrected the reaction rate constant for surface reactions imported from the CHEMKIN® software2.

Electrochemistry Module

  • Improved the default plots for the Primary Current Distribution interface1.
  • Corrected a sign error in the potential shift for models using an Ion-Exchange Membrane Boundary node2.

ECAD Module

  • Fixed a problem that prevented layers whose elements have no datatype set to be recognized during the import of GDS files3.

Fatigue Module

  • Corrected a problem where the Matrix Histogram plots were not generated for a Cumulative Damage interface2.

Heat Transfer Module

  • Added missing support for the new stabilization version in time-dependent studies for the Conjugate Heat Transfer multiphysics interface1.
  • Corrected Periodic and Continuity conditions for radiative intensity for P1 and the Rosseland approximation1.
  • Fixed handling of the out-of-plane thickness for the migration of the Inflow Heat Flux feature1.
  • Added missing user input for thickness in the Thin Layer feature when the Thermally thick approximation is selected together with the Thermal resistance option1.
  • Corrected the Opaque surface boundary option in the Slip Flow physics interface when the Radiation in participating media option is enabled1.
  • Corrected the stabilization formulation for the Radiative Beam in Absorbing Media interface1.
  • Swapped the meaning of what is up and down in the geometry of the Continuous Casting tutorial model to achieve a more realistic rendering1.
  • Updated the Circular Tube tutorial model to use the Inflow condition at the inlet1.
  • Added comparison with theoretical values in the Nonisothermal Turbulent Flow over a Flat Plate tutorial model1.
  • Fixed a problem with the stabilization formulation for models where a Translational Motion feature is combined with a user-defined coordinate system2.
  • Corrected the temperature dependency for general thin layers material2.
  • Added support for multiple instances of the Medium Properties feature in the Radiative Beam in Absorbing Media physics interface2.
  • Corrected an issue with the pair Continuity feature so that it now supports identity pairs with a boundary that is part of both the source selection and the destination selection3.
  • Fixed a problem with the Heat Continuity feature for moving mesh3.
  • Fixed a problem with the Moist Air Fluid type in the Thin Film and Fracture features3.
  • Fixed a problem with the numerical stabilization implementation for general thin films3.
  • Fixed a problem with the energy flux definition in thermal shells3.
  • Added the rhoref variable in the Phase Change Material and Moist Air features3.
  • Fixed an error in the formulation for the Screen feature when used in conjunction with the Nonisothermal Flow or Conjugate Heat Transfer interfaces3.

LiveLink™ for PTC® Creo® Parametric™

  • Resolved a problem that would cause synchronization to fail for the PTC® Creo® Parametric™ software version 4.0 M050 and later4.

LiveLink™ for Inventor®

  • Fixed an issue that in some cases prevented objects with visibility turned off to be excluded from synchronization3.
  • Fixed an issue that in some cases prevented faces in a selection from being transferred during synchronization3.
  • Fixed an issue with the synchronization of assemblies with unresolved and excluded components3.
  • Fixed an issue that in some cases prevented selections defined in a component to be loaded into an assembly3.

LiveLink™ for MATLAB®

  • Fixed an issue with mphsave on Windows® operating systems that prevented saving a file to an unmapped network drive2.
  • Fixed a problem with mphplot that prevented older versions of the MATLAB® software to work with COMSOL Multiphysics® software version 5.3a2.

LiveLink™ for Revit®

  • Fixed a problem related to installing the LiveLink™ for Revit® product on a Chinese-language operating system1.

LiveLink™ for SOLIDWORKS®

  • Improved performance when opening a file that contains selections with a large number of entities in the selection2.
  • Fixed an issue that in some cases prevented selections defined in a part to be loaded into the assembly3.
  • Added support for creating selections of Surface features, for example, Surface-Loft3.
  • Fixed an issue with creating selections that contain certain assembly features, for example, Cut-Extrude3.
  • Fixed an issue that prevented material selection to be generated during synchronization of curve objects3.

Microfluidics Module

  • Improved results, stabilization, and convergence of the Free Surface feature. The necessary compensations to the Surface Tension force in the Contact Angle feature have been added3.

Download Comsol 5.3a

Nonlinear Structural Mechanics Module

  • Corrected an error in the Storakers hyperelastic material model2.

Optimization Module

  • Fixed a problem that made it impossible to solve optimization models that have no physics-based study step2.

Particle Tracing Module

  • Fixed an error that occurred when using secondary particle emission and the Continuous Random Walk drag model in 2D without out-of-plane degrees of freedom3.

Plasma Module

  • Corrected links to context-sensitive help for the Plasma, Time Periodic interface1.
  • Fixed an issue with the electric potential for certain boundary conditions in the Plasma Module. In the Plasma, Time Periodic interface, for axisymmetric models, the Time Periodic to Time Dependent study now produces the same electric potential for the Metal Contact and Terminal features as the Time Periodic study3.

Ray Optics Module

  • Corrected some transformations of the Stokes parameters and phase when tracing polarized rays through a graded-index medium2.
  • Fixed an error that occurred when the Illuminated Surface feature was used to release rays into an adjacent domain with a complex-valued refractive index3.

Rotordynamics Module

  • Corrected an error in the computation of axial force in the Radial Roller Bearing feature3.

Semiconductor Module

  • Added support for including a Perfectly Matched Layer feature in a model containing a Schrödinger Equation interface with only a Semiconductor Module license2.

Structural Mechanics Module

  • Improved the Membrane interface formulation for cases where an additive strain decomposition was selected in a geometrically nonlinear study. A nonlinear strain formulation is now used instead of a previous linear strain formulation2.
  • Corrected an 'Undefined Variable' error in the Thin Film Damping interface2.
  • Added support for generalized plane strain when combining piezoelectric and linear elastic materials2.
  • Corrected some problems that would occur when using friction in a Bolt Thread Contact feature2.
  • Corrected an error that occurred when using the Thermal Expansion feature with the Tangent coefficient of thermal expansion option3.

Subsurface Flow Module

  • Fixed an issue when plotting results in the Two-Phase Flow Experiment app available with the Subsurface Flow Module3.

1 New in update 1
2 New in update 2
3 New in update 3
4 New in update 4

CHEMKIN is a registered trademark of Reaction Design Corp. in the United States and other countries. Inventor and Revit are trademarks or registered trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. Linux is a registered trademark of Linus Torvalds in the U.S. and other countries. MATLAB is a registered trademark of The MathWorks, Inc. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. PTC, Creo, and Creo Parametric are trademarks or registered trademarks of PTC Inc. or its subsidiaries in the U.S. and in other countries. SOLIDWORKS is a registered trademark of Dassault Systèmes SolidWorks Corp.

Download Comsol 5.3 Crack

COMSOL® software version 5.3 update 3 contains performance and stability improvements to COMSOL Multiphysics®, COMSOL Server™, and COMSOL Client. The update applies to COMSOL® software version 5.3 (Build: 223), version 5.3 update 1 (Build: 248), and version 5.3 update 2 (Build: 260). The update includes all performance and stability improvements from 5.3 update 1 and update 2 and can be applied directly to an installation of version 5.3. If you have to install version 5.3, then an installation of this version will now include all the performance and stability improvements from update 1 and update 2.

If you have a version older than version 5.3 and a valid license that is on subscription, then perform a full installation of version 5.3 from the Product Download page, which will include all previous updates.

How to Apply the Software Update

Before proceeding with your installation, make sure that you close and exit any running COMSOL® processes or any software you have running that correlates to a LiveLink™ product you would like to update (Excel®, MATLAB®, or a CAD software).

Updating COMSOL Multiphysics®

The easiest way to install the update for COMSOL Multiphysics® is to start the program and then select Check for Product Updates. If using the Windows® operating system, this is located in the File menu under Help. If using the Linux® or macOS operating systems, this is located in the Help menu.

For more information on how to install the update and for offline installation, see the Additional Instructions tab below.

In order to check that the update installation was successful, first start the COMSOL Multiphysics® software and select the About COMSOL Multiphysics menu option. If using the Windows® operating system, this is located in the File menu under Help. If using the Linux® and macOS operating systems, this is located in the Help menu. The listed version should be COMSOL Multiphysics® 5.3 (Build: 316).

Updating COMSOL Server™

To update COMSOL Server™ if using the Windows® operating system, run the Update program from the COMSOL Launchers folder in the Start menu.

Note that the COMSOL Server™ service process needs to be stopped before applying the update. For more information on how to install the update, installing on other operating systems, and offline installation, see the Additional Instructions tab below.

To check that the installation was successful, first make sure that COMSOL Server™ is running, then navigate to COMSOL Server™ in a web browser and follow the About COMSOL Server™ link in the lower-right corner. The new version should be COMSOL Server™ 5.3 (Build: 316).

Updating COMSOL Client for Use with COMSOL Server™

To update COMSOL Client for the Windows® operating system, download the new version from Client Download and install. The previous 5.3 installation will be overwritten. Your installation of COMSOL Client must have the same version number as the COMSOL Server™ installation that you connect to.

The following instructions apply only if you are not using the method based on the Check for Product Updates menu item, as described above.

Atualizando o COMSOL Multiphysics

1

Check the Version Number

  1. Start COMSOL Multiphysics®.
  2. Open the About COMSOL Multiphysics dialog box. If using the Windows® operating system, the dialog box can be found in the File menu under Help. If using either the Linux® or macOS operating systems, the dialog box can be found under the Help menu.
  3. Check that the version number is 5.3 (Build: 223, 248, or 260). This corresponds to the version that has not yet been updated.
2

Install the Update

Before you proceed with the installation, make sure to exit any running COMSOL Multiphysics® processes or any software you have running that correlates to a LiveLink™ product you would like to update (Excel®, MATLAB®, or a CAD software).

  1. Start the COMSOL® software update installer:
    • Windows® operating systems: Run the Update program from the COMSOL Launchers folder in the Start menu, or directly from the COMSOL 5.3 installation folder. The COMSOL Launchers folder can be found in the installation folder, for example, C:Program FilesCOMSOLCOMSOL53MultiphysicsCOMSOL Launchers.
    • Linux® operating systems: Run the update script from the COMSOL 5.3 installation directory, for example, /usr/local/comsol53/multiphysics.
    • macOS operating systems: Run the COMSOL Update application from the COMSOL 5.3 installation directory, for example, /Applications/COMSOL53/Multiphysics.
  2. The next step will be taken in the installer program's Options page and depends on whether or not you have a live internet connection or if you plan to download the update file for offline installation:
    • If you have an internet connection: Keep the Direct download setting.
    • If you have an internet connection via a proxy server: Select Download via proxy server and enter your proxy configuration settings.
    • If you do not have an internet connection on the target computer or if you want to apply the update several times on multiple computers: Download the following file to a folder on your computer DOWNLOAD UPDATE (276 MB) In the installer program, select Manual download and click Browse. Navigate to the downloaded file and click Open.
  3. Click Next to get to the Release Notes page for reviewing the update details.
  4. Click Next to get to the Install page and review the software components affected by the update.
  5. In the Install page, click Install to start the installation of the update.
3

Check the Installation

  1. Start COMSOL Multiphysics®.
  2. Open the About COMSOL Multiphysics dialog box. If using the Windows® operating system, this is located in the File menu under Help. If using the Linux® and macOS operating systems, this is located in the Help menu.
  3. Check that the version number is 5.3 (Build: 316). If not, the installation did not succeed.

Updating COMSOL Server™

1

Check the Version Number

  1. Navigate to the running version of COMSOL Server™ in a web browser.
  2. Click the About COMSOL Server link in the lower-right corner.
  3. Check that the version number is 5.3 (Build: 223, 248, or 260). This corresponds to the version that has not yet been updated.
2

Stop COMSOL Server™

Before you proceed with the installation, make sure to stop any running COMSOL Server™ processes.

  1. In Windows®: Stop the server by either typing close, if COMSOL Server™ is running in a command window, or by running the Stop COMSOL Server shortcut from the COMSOL Launchers folder in the start menu, if COMSOL Server™ is installed as a Windows® service.
  2. In Linux®: If you configured COMSOL Server™ using the systemd service, stop it by typing systemctl stop comsolserver53; otherwise, kill the COMSOL Server™ process.
  3. In macOS: Kill the COMSOL Server™ process.
3

Install the Update

Before you proceed with the installation, make sure to stop any running COMSOL Server™ processes, as described above.

  1. Start the COMSOL® software update installer:
    • Windows® operating systems: Run the Update program from the COMSOL Launchers folder in the Start menu, or directly from the COMSOL 5.3 installation folder. The COMSOL Launchers folder can be found in the installation folder, for example, C:Program FilesCOMSOLCOMSOL53ServerCOMSOL Launchers.
    • Linux® operating systems: Run the update script from the COMSOL 5.3 installation directory, for example, /usr/local/comsol53/server.
    • macOS operating systems: Run the COMSOL Update application from the COMSOL 5.3 installation directory, for example, /Applications/COMSOL53/Server.
  2. The next step will be taken in the installer program's Options page and depends on whether or not you have a live internet connection or if you plan to download the update file for offline installation:
    • If you have an internet connection: Keep the Direct download setting.
    • If you have an internet connection via a proxy server: Select Download via proxy server and enter your proxy configuration settings.
    • If you do not have an internet connection on the target computer or if you want to apply the update several times on multiple computers: Download the following file to a folder on your computer DOWNLOAD UPDATE (276 MB) In the installer program, select Manual download and click Browse. Navigate to the downloaded file and click Open.
  3. Click Next to get to the Release Notes page for reviewing the update details.
  4. Click Next to get to the Install page and review the software components affected by the update.
  5. In the Install page, click Install to start the installation of the update.
4

Start COMSOL Server™ Again

  • In Windows®: Start COMSOL Server™ by using the COMSOL Server shortcut in the start menu. Alternatively, if COMSOL Server™ was installed as a Windows® service, start it by using the Start COMSOL Server shortcut.
  • In Linux®: If you configured COMSOL Server™ using the systemd service, start it by typing systemctl start comsolserver53; otherwise, type <installation directory='>/bin/comsol server to start COMSOL Server™.
  • In macOS: Type <installation directory='>/bin/comsol server to start COMSOL Server™.
5

Check the Installation

  1. Navigate to the running version of COMSOL Server™ in a web browser.
  2. Click the About COMSOL Server link in the lower-right corner
  3. Check that the version number is 5.3 (Build: 316). (If not, the installation did not succeed.)

To manually install the different products, please follow the steps below.

Manual Update of COMSOL Multiphysics®

1

Check the Version Number

  1. Start COMSOL Multiphysics®.
  2. Open the About COMSOL Multiphysics dialog box. If using the Windows® operating system, the dialog box can be found in the File menu under Help. If using either the Linux® or macOS operating systems, the dialog box can be found under the Help menu.
  3. Check that the version number is 5.3 (Build: 223, 248, or 260). This corresponds to the version that has not yet been updated.
2

Download the Update Files

Click on the appropriate link below to download the update. In some browsers, such as Internet Explorer® browser, a dialog box will then open where you can click Run directly after the download has occurred. Before clicking Run, make sure that you have closed all COMSOL sessions. In other browsers, such as Chrome™ browser, you have to select the downloaded file and run it.

  • Windows - comsol_5.3.0.316_win.exe
  • Linux - comsol_5.3.0.316_linux.tar.gz
  • macOS - comsol_5.3.0.316_mac.dmg
Additional Product-Specific Update Files

If you have a license for any of the products listed in the table below, please also download the corresponding update:

ProductUpdate(s)
CAD Import Module Windows - comsol_5.3.0.316_cad_win.exe
Linux - comsol_5.3.0.316_cad_linux.tar.gz
macOS - comsol_5.3.0.316_cad_mac.dmg
LiveLink™ for Excel®Windows - comsol_5.3.0.316_llexcel_win.exe
LiveLink™ for Inventor®Windows - comsol_5.3.0.316_llinv_win.exe
LiveLink™ for MATLAB® Windows - comsol_5.3.0.316_mli_win.exe
Linux - comsol_5.3.0.316_mli_linux.tar.gz
macOS - comsol_5.3.0.316_mli_mac.dmg
LiveLink™ for SOLIDWORKS®Windows - comsol_5.3.0.316_llsw_win.exe
3

Installation

Before you proceed with the installation, make sure you have closed any COMSOL sessions or stopped any running COMSOL processes or any software you have running that correlates to a LiveLink™ product you would like to update (Excel®, MATLAB®, or a CAD software).

Windows® Operating Systems

Run the downloaded .exe file to extract the update to the COMSOL 5.3 installation directory, for example C:Program FilesCOMSOLCOMSOL53Multiphysics.

Linux® Operating Systems

Copy the downloaded .tar.gz file to the COMSOL 5.3 installation directory:

cp comsol_5.3.0.316_linux.tar.gz [installdir]

where [installdir] is the root of the installation, for example

/usr/local/comsol53/multiphysics.

Unpack the installation with the commands:

cd [installdir]tar xvzf comsol_5.3.0.316_linux.tar.gz

macOS Operating Systems

Double-click the downloaded .dmg file to mount the disk image. In the Finder, open the mounted disk and double-click the COMSOL installer icon. Select your COMSOL installation folder, usually called comsol53/Multiphysics.

4

Check the Installation

  1. Start COMSOL Multiphysics®.
  2. Open the About COMSOL Multiphysics dialog box. If using the Windows® operating system, this is located in the File menu under Help. If using the Linux® and macOS operating systems, this is located in the Help menu.
  3. Check that the version number is 5.3 (Build: 316). If not, the installation did not succeed.

Manual Update of COMSOL Server™

1

Check the Version Number

  1. Navigate to the running version of COMSOL Server™ in a web browser.
  2. Click the About COMSOL Server link in the lower-right corner.
  3. Check that the version number is 5.3 (Build: 223, 248, or 260). This corresponds to the version that has not yet been updated.
2

Stop COMSOL Server™

Before you proceed with the installation, make sure to stop any running COMSOL Server™ processes.

  1. In Windows®: Stop the server by either typing close, if COMSOL Server™ is running in a command window, or by running the Stop COMSOL Server shortcut from the COMSOL Launchers folder in the start menu, if COMSOL Server™ is installed as a Windows® service.
  2. In Linux®: If you configured COMSOL Server™ using the systemd service, stop it by typing systemctl stop comsolserver53; otherwise, kill the COMSOL Server™ process.
  3. In macOS: Kill the COMSOL Server™ process.
3

Download the Update Files

In some browsers, such as Internet Explorer® browser, a dialog box will then open where you can click Run directly after the download has occurred. Before clicking Run, make sure that you have closed all COMSOL sessions. In other browsers, such as Chrome™ browser, you have to select the downloaded file and run it.

  • Windows - comsol_5.3.0.316_win_server.exe
  • Linux - comsol_5.3.0.316_linux_server.tar.gz
  • macOS - comsol_5.3.0.316_mac_server.dmg
Additional Product-Specific Update Files

If you have a license for any of the products listed in the table below, please also download the corresponding update:

ProductUpdate(s)
CAD Import Module Windows - comsol_5.3.0.316_cad_win_server.exe
Linux - comsol_5.3.0.316_cad_linux_server.tar.gz
macOS - comsol_5.3.0.316_cad_mac_server.dmg
LiveLink™ for MATLAB® Windows - comsol_5.3.0.316_mli_win_server.exe
Linux - comsol_5.3.0.316_mli_linux_server.tar.gz
macOS - comsol_5.3.0.316_mli_mac_server.dmg
4

Installation

Before you proceed with the installation, make sure you have closed any COMSOL sessions or stopped any running COMSOL processes.

Windows® Operating Systems

Run the downloaded .exe file to extract the update to the COMSOL 5.3 installation directory, for example C:Program FilesCOMSOLCOMSOL53Server.

Linux® Operating Systems

Copy the downloaded .tar.gz file to the COMSOL 5.3 installation directory:

cp comsol_5.3.0.316_linux_server.tar.gz [installdir]

where [installdir] is the root of the installation, for example

/usr/local/comsol53/server.

Unpack the installation with the commands:

cd [installdir]tar xvzf comsol_5.3.0.316_linux_server.tar.gz

macOS Operating Systems

Double-click the downloaded .dmg file to mount the disk image. In the Finder, open the mounted disk and double-click the COMSOL installer icon. Select your COMSOL installation folder, usually called COMSOL53/Server.

5

Start COMSOL Server™ Again

  • In Windows®: Start COMSOL Server™ by using the COMSOL Server shortcut in the start menu. Alternatively, if COMSOL Server™ was installed as a Windows® service, start it by using the Start COMSOL Server shortcut.
  • In Linux®: If you configured COMSOL Server™ using the systemd service, start it by typing systemctl start comsolserver53; otherwise, type <installation directory='>/bin/comsol server to start COMSOL Server™.
  • In macOS: Type <installation directory='>/bin/comsol server to start COMSOL Server™.
6

Check the Installation

  1. Navigate to the running version of COMSOL Server™ in a web browser.
  2. Click the About COMSOL Server link in the lower-right corner
  3. Check that the version number is 5.3 (Build: 316). (If not, the installation did not succeed.)

Autodesk, the Autodesk logo, AutoCAD, Inventor, and Revit are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. Chrome is a trademark of Google Inc. Linux is a registered trademark of Linus Torvalds in the U.S. and other countries. macOS is a trademark of Apple Inc., registered in the U.S. and other countries. Microsoft, Internet Explorer, Excel, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. MATLAB is a registered trademark of The MathWorks, Inc. PTC, Creo, and Creo Parametric are trademarks or registered trademarks of PTC Inc. or its subsidiaries in the U.S. and in other countries. Solid Edge is a trademark or registered trademark of Siemens Product Lifecycle Management Software Inc. or its subsidiaries in the United States and in other countries. SOLIDWORKS is a registered trademark of Dassault Systèmes SolidWorks Corp.

All COMSOL® software products undergo stability improvements that are introduced as updates. The following list contains the most important improvements in COMSOL® version 5.3 update 3 (including those of update 1 and 2).

COMSOL Multiphysics

  • Improved the responsiveness of the online context-sensitive help.
  • Fixed a character-encoding error for the Simplified Chinese help desk page.
  • Fixed a problem that would cause an unnecessary mesh rebuild when opening an old model; this problem only affected models using Mesh Parts under Global Definitions.
  • Fixed an issue pertaining to importing a mesh to the Geometry node in the model tree or when remeshing a Deformed Geometry, where the existence of isolated edges and vertices could lead to a corrupt geometry and render the COMSOL Multiphysics® software unstable.
  • Added two new built-in methods for returning information associated with a model tree View node in the API; the view.geom() method returns either the geometry sequence or null for views not associated with a geometry, while the view.getSDim() method returns the space dimension.
  • Changed the default constraint method for periodic conditions from the Elemental type to Nodal; this change makes the default constraint method consistent with earlier versions.
  • Improved the terminology in the COMSOL Desktop® user interface for the Spanish and French languages.
  • Improved the performance of initialization of solutions and made other miscellaneous performance improvements.
  • Added an error message for when unmeshed domains are included in the selection of the Geometrical Optics or Ray Acoustics interfaces; ordinarily, unmeshed domains and voids should be excluded from the physics interface selection in these cases.
  • Fixed a problem that prevented opening MPH-files stored on a Samba® disk when running on macOS operating system software.
  • Added functionality so that the iterative solver suggestion now works for acoustic-structure interaction in the time domain.
  • Fixed a problem related to accessing locally installed help files when running COMSOL Multiphysics® connected to a remote COMSOL Multiphysics® server session.
  • Improved the performance of certain variables used in the interfaces based on the boundary element method for the case where these were evaluated inside component coupling operators.
  • Fixed a problem with the COMSOL Multiphysics® server so that it now works properly on Linux® clusters.1
  • The predefined iterative solver suggestion for acoustic-piezoelectric interaction models now works in the time domain.1
  • Improved the stability of the Application Library Update in various ways, including instant integration of added or modified model documentation.2
  • Fixed app layout issues and corrected an error that could be triggered as the result of an undefined variable.2
  • Fixed a problem when using the Stabilized Convection-Diffusion Equation interface in combination with a unit system set to None.2
  • The KdV Equation and Solitons model in the Equation Based folder in the COMSOL Multiphysics Application Library has been improved with a better time resolution.2
  • Corrected an error that caused the SCGS smoother with Vanka variables to work incorrectly in cluster simulations.2
  • Fixed a problem that would occur when saving MPH-files that were temporarily locked by other programs such as file synchronization software like Google Drive™ online storage service or Dropbox® storage.2

COMSOL Server™

  • Fixed several stability issues.

AC/DC Module

  • Improved the performance of some of the demo applications in the Application Libraries.
  • Improved the performance of certain variables used in the interfaces based on the boundary element method for the case where these were evaluated inside component coupling operators.

Acoustics Module

  • Corrected the formulation of the time-domain PML for pressure acoustics in order to eliminate unwanted reflections for 2D axisymmetric models.
  • Improved the dynamic help of the Acoustics Module.2
  • Fix of an error in the expression for the compressibility in the Johnson-Champoux-Allard-Lafarge option for the Poroacoustics feature.2

Application Builder

  • Fixed an issue with running External Class nodes through Batch jobs.2

CAD Import Module

  • Fixed an issue pertaining to performing Defeaturing and Repair where the error message 'Error when serializing reference to: GeomObject' would appear when attempting to run a Study a second time.
  • Fixed a problem with using the File Import for CATIA® V5 product where importing certain CATIA® V5 files incorrectly gave the error 'File version is not supported' in version 5.3.

CFD Module

  • Updated the Two-Phase Flow multiphysics coupling node in the model tree so that the temperature input field is always visible.

Chemical Reaction Engineering Module

  • Updated the step-by-step modeling instructions for the Zone Electrophoresis model.

ECAD Module

  • Fixed a problem with importing ODB++ files where certain text objects were not automatically identified and ignored.
  • Fixed a problem when importing GDS files that contain mirrored arrays.2

Electrodeposition Module

  • Improved the step-by-step modeling instructions for the Rotating Cylinder Hull Cell model.

Geomechanics Module

  • Fixed an error in the isotropic hardening option when used together with an elliptic cap in the soil plasticity material models.

Heat Transfer Module

  • Corrected the expressions used for the postprocessing variables nteflux and nteeflux for models based on the Thermoelectric Effect interface.
  • Enabled Thermal Expansion for models with an Isothermal Domain.
  • Fixed a problem with the definitions of the Td and Tu variables, available on boundaries, which would occur in some configurations where an Isothermal Domain interface and a Thin Layer were combined.
  • Improved the equation display for the Moist Air version of the Moisture Transport interface.
  • Fixed the inverted legend on natural convection sketches.2
  • Fixed the definition of energy balance postprocessing variables for models that have a diffuse surface boundary condition on internal boundaries.2
  • Fixed a problem with missing entities in selections loaded from assembly components.2

LiveLink™ for Inventor®

  • Fixed a problem where selections would sometimes not work subsequent to adding a feature node in the Model Builder of the One Window interface.

LiveLink™ for MATLAB®

  • Fixed a problem pertaining to using mphstart and mphlaunch when there was a space in the installation path of COMSOL Multiphysics®.
  • Fixed a problem pertaining to mphnavigator that would occur when clicking 'Copy set' and simultaneously selecting a parameter node in the model tree.

Nonlinear Structural Mechanics Module

  • Fixed a circular dependency error that would sometimes occur when combining viscoelasticity with a user-defined hyperelastic material.
  • Corrected an error where a variable name could be undefined in the Navarro-Herring creep model.2

Plasma Module

  • Fixed an undefined variable error that could occur with the Symmetry boundary condition in the Heavy Species interface.
  • Added the correct weak contributions for the Flux condition in the Heavy Species Transport interface on boundaries with a nonzero normal velocity.

Ray Optics Module

  • Corrected the description of the gopminop1 component coupling, which contained an error.
  • Fixed a problem with the Illuminated Surface feature so that the initialization of ray intensity now works in 2D axisymmetric models.1
  • Fixed a problem with the Inlet feature for the Geometrical Optics interface so that ray direction initialization now works in 2D axisymmetric models.1

Structural Mechanics Module

  • Corrected an error where, in certain cases, the strain variable computed in a Spring Foundation node had the wrong sign.
  • Updated the heat source term for the Thermoelasticity interface so that it is now nonzero only when the Structural transient behavior setting is set to Include inertial terms.
  • Corrected an error that made it impossible to use a Point Mass condition in the 2D version of the Beam interface; this error occurred in cases where the Study property Include geometric nonlinearity was enabled.
  • Fixed an error in the External Stress node in the Shell interface where the added stress could become incorrect if the Global coordinate system option was selected and another coordinate system was simultaneously used in the Shell Local System node in the model tree.
  • Fixed a problem where the computed moment was incorrect in cases where Evaluate reaction forces had been selected for a Rigid Connector in the Solid Mechanics interface; the result was previously scaled by the area of the boundaries to which the Rigid Connector was attached.
  • Fixed a problem in the Beam interface that made it impossible to use variables or expressions in the input fields for Section Orientation.
  • Fixed a problem that would occur when the Solid Mechanics interface was used together with the Optimization Module interfaces in certain cases, causing an excessive number of constraints to be generated.
  • Corrected an error that made it impossible to combine the features External Stress Relation and Contact.2
  • Fixed a problem that would occur when exporting beam section properties.2
  • Fixed a problem that would occur when 2D models contained more than one Rigid Connector feature having a Mass and Moment of Inertia attribute.2

1 New in update 2
2 New in update 3

Autodesk, the Autodesk logo, AutoCAD, Inventor, and Revit are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. Chrome and Google Drive are trademarks of Google Inc. Dropbox is a registered trademark of Dropbox, Inc. Linux is a registered trademark of Linus Torvalds in the U.S. and other countries. macOS is a trademark of Apple Inc., registered in the U.S. and other countries. Microsoft, Internet Explorer, Excel, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. MATLAB is a registered trademark of The MathWorks, Inc. PTC, Creo, and Creo Parametric are trademarks or registered trademarks of PTC Inc. or its subsidiaries in the U.S. and in other countries. Solid Edge is a trademark or registered trademark of Siemens Product Lifecycle Management Software Inc. or its subsidiaries in the United States and in other countries. SOLIDWORKS is a registered trademark of Dassault Systèmes SolidWorks Corp.